We use cookies for analytics, advertising and to improve our site. To find out more see our privacy policy.
Shop Electrical Batteries
Batteries Custom

Batteries Custom

6 V Antigravity AG-802 Lithium Ion Battery
6 V Antigravity AG-802 Lithium Ion Battery
The Antigravity Battery AG-802 is a 6-volt 8-Cell Lithium Ion battery, extremely light and in an extremely small case that will easily fit all horsehoe type oiltanks or early battery boxes. It is made for those who ride classic older bikes that run the 6-Volt system and is a very reliable compact replacement for the bulky and large 6-volts of the past. It is only meant to power the ignition of your bike, not to run a starter motor. The AG-802 can hold a charge up to a year provided there are no parasitic drains and can be installed in any orientation.
more …
12V Antigravity AG-401/4-Cell Small Case Lithium Ion Batteries
12V Antigravity AG-401/4-Cell Small Case Lithium Ion Batteries
The Antigravity "Small Case" lithium ion batteries offer the most power and performance in the most compact size. They can be used as ultra-light battery for race vehicles to save space and weight, or for fitting into Custom and Performance motorcycles which require a small battery that keeps the look and at the same time delivers enough power to turn the starter. Can hold a charge up to a year provided there are no permanent drains, i.e. accessories that draw power when the bike is off, such as alarms, ECUs, GPS, clocks etc. Antigravity Small Case batteries can be installed in any orientation, feature unbreakable brass terminals and come in different power levels.
Capacity is indicated as "xAh Pb Eq" (lead equivalent), because the usable capacity of Li-Ion batteries is typically 3 times higher than an equivalent lead-acid accumulator. In other words, the value indicates which size lead acid battery would be required to deliver the same starting work.
This battery is best used for kickstart only bikes or race track applications where extreme weight loss and ultra compact size are desired. It is also often chosen by custom builders who want the smallest battery to tuck out of the way.
more …
12V Antigravity AG-801/8-Cell  Small Case Lithium Ion Batteries
12V Antigravity AG-801/8-Cell Small Case Lithium Ion Batteries
The Antigravity "Small Case" lithium ion batteries offer the most power and performance in the most compact size. They can be used as ultra-light battery for race vehicles to save space and weight, or for fitting into Custom and Performance motorcycles which require a small battery that keeps the look and at the same time delivers enough power to turn the starter. Can hold a charge up to a year provided there are no permanent drains, i.e. accessories that draw power when the bike is off, such as alarms, ECUs, GPS, clocks etc. Antigravity Small Case batteries can be installed in any orientation, feature unbreakable brass terminals and come in different power levels.
Capacity is indicated as "xAh Pb Eq" (lead equivalent), because the usable capacity of Li-Ion batteries is typically 3 times higher than an equivalent lead-acid accumulator. In other words, the value indicates which size lead acid battery would be required to deliver the same starting work.
This battery is recommended for kickstart only bikes or smaller displacement bikes with electric starters up to 0.6 kW max. where extreme weight loss and ultra compact size are desired. It is often chosen for custom builds like cafe racers or lean Bobbers/Choppers who want the battery to tuck out of the way.
more …
12V Antigravity AG-1201/12-Cell Small Case Lithium Ion Batteries
12V Antigravity AG-1201/12-Cell Small Case Lithium Ion Batteries
The Antigravity "Small Case" lithium ion batteries offer the most power and performance in the most compact size. They can be used as ultra-light battery for race vehicles to save space and weight, or for fitting into Custom and Performance motorcycles which require a small battery that keeps the look and at the same time delivers enough power to turn the starter. Can hold a charge up to a year provided there are no permanent drains, i.e. accessories that draw power when the bike is off, such as alarms, ECUs, GPS, clocks etc. Antigravity Small Case batteries can be installed in any orientation, feature unbreakable brass terminals and come in different power levels.
Capacity is indicated as "xAh Pb Eq" (lead equivalent), because the usable capacity of Li-Ion batteries is typically 3 times higher than an equivalent lead-acid accumulator. In other words, the value indicates which size lead acid battery would be required to deliver the same starting work.
This battery for electric start bikes is a great choice for those seeking very high power in a compact battery. It replaces the typical 12 Ah lead/acid battery with a weight saving of up to 7 pounds while offering much more cranking power. It is best used for electric starters up to 1.2 kW and engines up to 1100 cc.
more …
12V Acid Type Battery for Horseshoe Oil Tanks
12V Acid Type Battery for Horseshoe Oil Tanks
Custom battery which fits into your stock horseshoe oil tank or 45” battery tray. It is shorter than the original 6 V battery, therefore the use of standard mounting components requires a spacing block or extension.
more …
Yuasa AGM Mini Batteries
Yuasa AGM Mini Batteries
These reliable batteries are suited for any purpose, be it long distance riding or drag strip applications. They are gel-filled which means guaranteed not to spill or leak. Installation is possible in any tilted position up to 90°. The disadvantage compared to regular batteries is less power at the same weight.
more …
Yuasa AGM 3Ah Batteries
Yuasa AGM 3Ah Batteries
With a base area of 104 x 70 mm and the option of installing them at an angle, these batteries are ideal for installation in a horseshoe oil tank or for space-saving custom projects. The low capacity and CCA below 100 do not allow for electric starts, but that's not part of the job in a classic Harley anyway. For kicking and as a buffer at low speeds (in city traffic, at traffic lights), the power is more than sufficient.
The Yuasa YTX series AGM batteries are delivered “wet-charged”: filled and charged at the factory, the acid is bound in special glass fiber mats. So no fiddling with acid packs and completely leak-proof. Just ready to go.
The 3 Ah YTX4L battery will fit best the bikes with basic electrics: just ignition, horn, lights.
more …
Yuasa AGM 4Ah Batteries
Yuasa AGM 4Ah Batteries
With a base area of 104 x 70 mm and the option of installing them at an angle, these batteries are ideal for installation in a horseshoe oil tank or for space-saving custom projects. The low capacity and CCA below 100 do not allow for electric starts, but that's not part of the job in a classic Harley anyway. For kicking and as a buffer at low speeds (in city traffic, at traffic lights), the power is more than sufficient.
The Yuasa YTX series AGM batteries are delivered “wet-charged”: filled and charged at the factory, the acid is bound in special glass fiber mats. So no fiddling with acid packs and completely leak-proof. Just ready to go.
The YTX5L with 4 Ah capacity is more suitable for kickstart bikes with a few extras: auxiliary headlights, loud and power-guzzling horns, that kind of thing.
more …
EnerSys Odyssey AGM Batteries
EnerSys Odyssey AGM Batteries
Where room is sparse and small batteries are demanded, EnerSys Odyssey batteries are the choice. They combine AGM technology (acid in absorbent glass mats) with high-purity lead plates (99.99% pure lead). In addition, the Odyssey plates are of especially thin contsruction, leading to optimum contact between acid and plates due to the extra large plate surface. The result is enormous cranking power, considering their size, and up to an 80% discharge rate. An average flooded battery gives you about 30%.
As always in life, nothing good is for free. Odyssey batteries have to be isolated against vibrations and work best between -40°C and +60°C. The deep cycle discharge rate of 80% requires proper recharging to avoid sulfation, which in turn would destroy the precious battery. Short distance or low mileage per year riders should seriously consider an applicable charger.
Implementing these low maintenance steps for the batteries will reward you with up to four times longer lifetime- compared to standard batteries - and low discharge rate.
more …
Battery Eliminators
Battery Eliminators
This special condensor is necessary when running the generator or alternator on a magneto ignition equipped engine without battery. Eliminates low-rpm light flickering.
more …
Antigravity Micro-Start XP-1
Antigravity Micro-Start XP-1
The next generation version of the XP-1 is out! It features 400 amps of starting current and — brace yourselves — up to 2,000 peak amps. Enough to start up not only your 2017 FLTCU but any V8 or Mack truck. It also powers and charges laptops, cell phones, iPhones, iPads, Tablets, Blue Tooth devices and more. Just charge the XP-1 once and easily take back-up power wherever you go.
Features:
USB A exit port (5 V/3 A, 9 V/2 A or 12 V/1.5 A), USB C in/out port (outlet power: 5 V/3 A, 9 V/3 A, 12 V/2.5 A, 15 V/2 A or 20 V/1.5 A), jump start port, LED light (steady, strobe, SOS), LCD screen instead of state LEDs, Built-in over-charge and over-discharge, reverse polarity, short circuit protections, 30 s automatic power-off when not in use,
Scope of delivery:
Micro-Start XP-1 power bank, Jump start wire and clamp kit, Wall socket slow charger, plugs A and C (125 … 240 V, 50 hz, 0.5 A), USB A to C cable, Carrying case, Manual (English, Deutsch, Français, Español),
more …
Antigravity Micro-Start XP-3
Antigravity Micro-Start XP-3
Experience a quantum leap in battery technology. The Micro-Start XP-3 is an ultra-small and extremely powerful Lithium-Ion power source and when we say small, we mean it fits in your pocket. Still it jump starts any car or motorcycle with 200 Amp jump starting ability, plus it is also powers or charges all your electronic devices such as iPads, cell phones, GPS, GoPro Cameras, MP3 players and everything else that can be charged via the USB Bus. Charge it once and take it with you anywhere and never again worry about getting stranded. Now you can easily take back-up power anywhere you go and not worry about coming back to a dead vehicle battery or having your cell phone run out of power when you need to make that important phone call. Just pull out your Micro-Start and get going again.
Features:
3 Power ports: a jump start port and two USB 5V output ports for charging or powering electronic devices, Hi-Power LED flashlight with 2 flash patterns including an S.O.S. flashing beacon pattern, 4 LED battery capacity indicator, Over-charge and over-discharge protections, Automatic power-off when not in use, Detachable Mini Jumper Clamps, Micro USB port for charging via USB cable,
more …
Antigravity Micro-Start XP-10
Antigravity Micro-Start XP-10
The next generation version of the XP-10 is out! It features 600 amps of starting current and — brace yourselves — up to 3,000 peak amps. Enough to start up not only your 2017 FLTCU but any V8 or Mack truck. It also powers and charges laptops, cell phones, iPhones, iPads, Tablets, Blue Tooth devices and more. Just charge the XP-10 once and easily take back-up power wherever you go.
Features:
15 V / 10 A DC exit port, USB A exit port (5 V/3 A, 9 V/2 A or 12 V/1.5 A), USB C in/out port (outlet power: 5 V/3 A,12 V/2.5 A, 15 V/2 A or 20 V/1.5 A), jump start port, LED light (steady, strobe, SOS), LCD screen instead of state LEDs, Built-in over-charge and over-discharge, reverse polarity, short circuit protections, 30 s automatic power-off when not in use,
Scope of delivery:
Micro-Start XP-10 power bank, Jump start wire and clamp kit, Wall socket slow charger, plugs A and C (125 … 240 V, 50 hz, 0.5 A), USB A to C cable, Carrying case, Manual (English, Deutsch, Français, Español),
more …
Bates BattBoy HM5
Bates BattBoy HM5
Modern gel or Li-Ion batteries offer a significant advantage - they are leak-proof. Those who ever experienced spilled acid in their horseshoe oil tanks will highly appreciate this fact. On the other hand, owners of classic bikes do like the looks of their original energy store and the corresponding cover and mounts. With a Bates BattBoy Battery Box you can have the best of both worlds, because what looks like a period type HM5 6V accumulator on the outside can house a safe, modern battery within. Just hook it with two eyelet wires to the terminals on the bottom of the lid and you are all set. Perfect for 6 to 12 volts electrical system conversions, too. When using suitable Antigravity versions you even have some storage room left for a few small spare parts, safety vest, Cuban cigars, etc. Ain't this one heck of a cool solution for an old problem?
more …
Cannonball LION Battery Boxes
Cannonball LION Battery Boxes
Our electric start system just got even more stealthy.
The Cannonball Stealth Starter can give classic Harley Big Twins (with rigid or swingarm frames) the almost invisible option of starting by pushing a button. For reliable operation this system needs a powerful 12V Li-Ion battery, a solenoid, additional wiring and circuit breakers. To avoid an unsightly mess we developed this solution that incorporates everything inside a humble looking Harley HM5 battery case. From the outside it’s as stock looking as the 6V original, but the electrics inside are state of the art. In the two compartments there’s room for a 12 cell Antigravity Li-Ion battery and all necessary electrical components. A stock like lid looks as innocent as the vintage acid lead battery it replaces.
more …
Bates BattBoy 65
Bates BattBoy 65
Modern gel or Li-Ion batteries offer a significant advantage - they are leak-proof. Those who ever experienced spilled acid in the battery tray, on the frame, on the swingarm, etc. will highly appreciate this fact. On the other hand, owners of classic bikes do like the looks of their original energy store and the corresponding cover and mounts. With a Bates BattBoy Battery Box you can have the best of both worlds, because what looks like a period 32 amp 12V accumulator on the outside can house a safe, modern battery within. Just hook it with two eyelet wires to the terminals on the bottom of the lid and you are all set. When using suitable Antigravity versions you even have storage room left for a few small spare parts, safety vest, emergency beer, etc. Ain't this one heck of a cool solution for an old problem?
more …
Bates Lids for Bates Battboy HM5 and Cannonball LION
Bates Lids for Bates Battboy HM5 and Cannonball LION
more …
Charging Harnesses with SAE plug for permanent installation
Charging Harnesses with SAE plug for permanent installation
The SAE plug connects to any battery charger equipped so. Two M6 eyelets connect the small harness permanently to the battery poles. This allows you to simply plug the charger in without removing the battery from its tray.
more …

Batteries not necessarily for the original purpose

After performance measures on the engine, with a raised compression of about 2.0, your Harley may need a new starter motor. Most definitely, however, a more powerful battery, i.e. one that can deliver a higher current (cold start current, CCA) for the same size. Not necessarily more capacity, i.e. ampere hours (Ah), capacity is more important if the engine doesn't start at the first push of the starter button.

These two things tend to be confused: capacity is the charge of the battery, that is, how much energy it has stored in total. Current is how much of that charge the battery can deliver at one time. The higher the current, the faster/better the starter motor will work. The higher the capacity, the longer it spins.

Bike rebuild - battery redesign

If the starter motor is eliminated and also the electrical system is rewired, or if a different oil tank is installed, many also immediately think of a new battery, as small and hidden as possible. However, when choosing a battery, it is important to consider the regulator and the alternator: can my regulator handle the small battery? Mechanical regulators can be adjusted, electronic regulators have a certain range and can adjust the charging power within certain limits. If neither works, the regulator or even the alternator must be changed.

How do I find a suitable battery for my conversion?

When you have finished thinking about the conversion, it's time to choose. Our store will help you: with the dimensions of our batteries you can start making a tray or choose a ready-made tray from us. In addition, we list values for voltage, capacity and starting current for each battery, ... so you can decide whether your charging system harmonizes with the new battery.

I would like to have a lithium-ion battery. How can I enjoy it as long as possible?

LiFePo4 batteries used in motorcycles like to live in controlled conditions:

  • few of us ride at freezing temperatures, but the upper temp limit should definitely be considered if the battery is to be installed in the oil tank. No contact with the walls, leave enough space for cooling air to flow through, consider thermally insulating the battery.
  • Temperature limits also apply to plug-in charging. - Absolute maximum for regulator voltage: 14.6 V. Please remember that regulators can raise the voltage to over 15 V at higher speeds. This doesn't have to be the case, but we have seen original regulators that brought it up to 18 V - and at idle everything was ok. So if in doubt, measure it at high rpm as well.
  • If the bike is not used for a long time, check the battery voltage regularly. At 12.4 V or below it should be recharged. Modern speedometers and instruments on Harleys work on 12 V continuous current, as do the flasher modules. If you don't mind resetting the clock, consider pulling the main fuse or unscrewing the negative wire. By the way, Antigravity advises against leaving batteries on the charger all the time, even if it is a trickle charger. Please charge only with a charger that is also suitable for lithium-ion batteries.
  • Regular driving is the best thing you can do to your lithium-ion battery.

Have any questions?

Our service team will be glad to help out: Mondays - Thursdays 08:00-17:00 CET, Fridays 08:00-16:00 CET, Phone: +49 / 931 250 61 16, eMail: service@wwag.com