Keihin CV Carburetor 49 State

Use this kit to replace the worn spring and O-ring of your low speed mixture adjuster screw.

Replacement float for your Keihin CV-carburetor.

Supporting collar for the stock plastic top cover.

Replacement for the plastic fuel hose fitting for all Keihin carburetors, incl. CV series.

This solid die-cast top cover replaces the stock black plastic part on CV carburetor. Easy bolt-on installation.

Main jets for Keihin CV-carburetors used from 1988→.

Adapter; for Manifold; for Keihin CV and Mikuni HSR 42 carburetors; round; rubber / steel, mounting hole distance on carburetor side: 70-75 mm; for Mikuni carburetors; Spigot Ø: 44 mm; with clamp; gross weight: 130 g

Originally developed for race bikes to speed up jet changes but today they are popular among street riders, too. The set comprises four screws with large knurled heads for easy installation and removal of your float bowl without tools.

Even with an angled screw driver adjusting your Keihin's idle mixture is no fun. Swap your stock adjuster screw againts this knurled head adjuster, and you are at ease: Idle mixture adjustment with just your finger tips!

Transparent lines which can be used as carburetor vent lines or overflow hoses. They are made from PVC.

This plate allows installation of CV carburetors on Bendix and Keihin (butterfly) manifolds. Thus you can use them on Knuckleheads, Panheads, Shovelheads, Sportster →1987 and Evo Big Twins →1989. Precisely CNC-machined from billet aluminum, with special O-ring. The adapter plate has a press-fit on the carburetor, optionally using a cold-weld compound. No other gaskets necessary....

A stainless steel bracket which allows you to relocate your CV-Carburetor choke cable - without disassembly - to the right side of your Sportster, FXR, Dyna or Softail. Mounts switches or the like, too, of course.

This adapter allows for the installation of OEM or aftermarket air cleaners with recessed backing plate on Keihin CV carburetors. At least that’s what it is intended for, but of course, you can mount any air cleaner, carb cover or air horn with a Tillotson, Bendix or Keihin bolt pattern. It is also useful with large or low mounted gas tanks, because it positions the air cleaner further to the right by 21 mm.

Rubber adaptors to mount spigot style carbs like Mikuni, Dell‘Orto, Keihin CV, etc. to manifolds with two-bolt flange.

These brackets allow, in combination with a custom support for Big Twins 1990-1999, for an easy and solid installation of a CV carburetor to Shovelhead engines late 1978-1984. They bolt to the underside of the rocker boxes. ...

These Mooneyes idle adjuster screws facilitate the adjusting of the idle speed and, with the cult Mooneyes ball, also cut a fine figure. The ball can be unscrewed and replaced with other Mooneyes valve caps.

The installation of a a CV carburetor with Custom air cleaner on a Panhead, Shovelhead or Ironhead Sportster involves two problems:...

If you own a Shovelhead, Panhead or Ironhead Sportster, this bracket is for you. It allows attaching a CV carburetor to 2-bolt Tillotson, Bendix or Keihin (butterfly) manifolds. The bracket even has a mount for the CV-carburetor choke cable. Longer screws and little spacers to go to the carburetor lid are included. ...

Give your CV carburetor a fresh look with the ribbed top cover by Bates. The cast-in Bates “B” adorns the front center of the cover.

The Thunderslide kits contain a specially designed slide made from plastic. The benefits are its extreme light-weight and a faster throttle response....

Improve the performance of stock 40 mm Keihin CV-Carburetors. These kits contain all necessary jets, needles, springs and a detailed instruction that leads you step-by-step through the carb tuning and modification for maximum performance on stock motors as well as on motors with performance cams and exhausts. More power throughout the complete RPM-range and better throttle response. Especially recommended when you switch to a Custom air cleaner.

High-quality, low priced alternative to our Dynojet kit. Contains the same components, including 5 main jets (1.50 to 1.90) and permits to improve the performance of the stock CV-Carburetor as used from 1989 to 1999 on Evolution Big Twins. Fits carbs with or without accelerator pump.

Nice accessory that neatly installs over the stock black plastic knob on all XL 1988-2006 and Big Twins 1990-2006 with CV carbs. It not only looks 100% better, with its knurled edge it is also easier to hold and operate.

These kits are designed to support CV-Carburetors on models equipped with the cylinder head crankcase breather system, when mounting custom air cleaners that lack the support.

Distinctive aluminum top cover for your CV carb. Sports a finned streamline design and can be mounted in minutes.

Cast aluminum manifolds for Evolution engines with Keihin CV carbs.

Idle adjustment of Keihin carbs can be annoying because the adjusting screw is somewhat hard to reach, in particular with stock air cleaners and large gas tanks. The Bates adjuster solves this problem once and for all. It features a flexible shaft and a large adjuster knob with knurled edge which allows carb adjustment without a screwdriver and as fast as you can say "****! I forgot my ******* tool roll in the garage!"

The selection of air horns, velocity stacks and carb covers for Linkert carburetors is pretty extensive and many of them look nicely at home on a CV-carb, too. With this little adapter plate you can make this happen in no time. Precisely CNC-machined from billet for a hassle-free installation. ...

These transparent lines by Helix can be used as carburetor vent lines or overflow hoses. They are made from premium polyurethane with a Shore hardness of 85, which provides for superior resistance against abrasions, kink, tear, oxidation and chemical influences. It has a melting temperature of 188°C and an operating temperature range of -59° to +68°C. This line material will not get hard and stays flexible.